Trades · Updated 2026
Fence installation cost
Typical range£15–£8,000· Average panel fence (supply & fit per panel)
Garden fencing costs per metre for 2025 — all fence types. In the UK, expect to pay between £15 and £8,000, with the typical project around £120 (average panel fence (supply & fit per panel)). Regional variation, specification tier and site access conditions all shift the final quote.
Quick answer: Fence installation cost in the UK typically costs between £15 and £8,000 (Average panel fence (supply & fit per panel)). London and the South East run 20–35% above this range; the North, Wales and most of Scotland sit 5–15% below.
Homeowners researching this typically also price up garden landscaping cost and patio cost. For wider context, browse our bathroom pricing, kitchen pricing and boiler & heating costs.
Cost table
Indicative price ranges (UK, GBP)
| Item | Typical range (GBP) |
|---|---|
Closeboard panel (per panel) — 6x6ft standard panel, concrete post | £60–£100 |
Featherboard (per panel) — Vertical board-on-board, more durable | £80–£140 |
Trellis top added (per panel) — Extra height, decorative | £15–£30 |
Picket fence (per m) — Traditional front garden style | £40–£90 |
Acoustic fence (per m) — Noise reduction, heavier panels | £80–£180 |
Full garden fence (30m) — 30m of closeboard, concrete posts | £1,500–£5,000 |
Labour costs
Labour typically accounts for 50% of the total project cost in the UK.
Labour line items
| Item | Typical range (GBP) |
|---|---|
Fencer (per day) | £180–£300/day |
Post installation (concrete) | £20–£50/post |
Old fence removal | £15–£35/panel |
Materials costs
Materials and fittings make up the remainder of the budget, with specification tier driving most of the variation.
Materials & fittings
| Item | Typical range (GBP) |
|---|---|
Closeboard panel (1.8m x 1.8m) | £0–£0 |
Concrete post (2.4m) | £0–£0 |
Timber post (1.8m above ground) | £0–£0 |
Post mix concrete | £4–£8/bag |
Fence treatment / stain | £0–£0 |
Factors affecting cost in the UK
- ·Region — London and the South East run 15–30% above national averages.
- ·Specification tier — premium materials and finishes can double the base cost.
- ·Access and site conditions — flats, restricted parking and listed buildings add time.
- ·Scope changes mid-project — late design decisions are the biggest cost overrun driver.
- ·Trade availability — quotes rise 10–20% in peak spring and summer months.
Ways to reduce cost
- ·Choose lap or featheredge panels in 1.8 m heights rather than bespoke sizes.
- ·Use concrete posts and gravel boards once, then swap panels every 10–15 years.
- ·Buy panels direct from a fencing supplier rather than a national DIY chain.
- ·Share cost with neighbours where the boundary is jointly owned.
- ·DIY panel replacement on existing concrete posts — labour-only saving of 50–60%.
Frequently asked questions
- How long does a fence last?
- Pressure-treated timber panels last 10–15 years. Concrete posts outlast the panels and typically last 30+ years. Quality featherboard fencing can last 15–20 years. Timber rails typically fail before the boards.
- How do I know where my boundary is?
- The title deeds or HM Land Registry title plan will show which boundaries you are responsible for — usually shown with a 'T' mark on the plan inside your boundary. The deeds should state whether you are responsible for maintaining the left or right fence.
- What is the maximum fence height without planning permission?
- A fence bordering the highway (road or footpath) must not exceed 1m without planning permission. A rear garden boundary fence can be up to 2m without permission. Always check if you are in a conservation area.
- Can I erect a fence without telling my neighbour?
- You can erect a fence on your own property without requiring permission from your neighbour. However, if it involves work near or on the party boundary or foundation, the Party Wall Act may apply. Good neighbourly practice is to consult first.